Filter
Top Products
MultiVOIP User Guide Technical Configuration (Analog)
192
FXS Ground Start Parameters (not supported). The parameters
applicable to FXS Ground Start are shown in the figure below and
described in the table that follows.
FXS Ground Start Interface: Parameter Definitions
Field Name Values Description
FXS Ground
Start
Y/N Enables FXS Loop Start
interface type.
Inter Digit
Timer
integer values
in seconds
This is the length of time that
the MultiVOIP will wait
between digits. When the time
expires, the MultiVOIP will
look in the phonebook for the
number entered.
Default = 2.
Message
Waiting Light
Y/N
Applicable only when
MultiVOIP is used with Avaya
Magix PBX units equipped with
Merlin Messaging Centralized
mail. When enabled, the
Message Waiting Light feature
allows the PBX to send mode-
codes and message-waiting
indications to another Avaya
Magix PBX, which in turn will
turn on the message waiting
light on a phone station. It also