Filter
Top Products
G
ETTING
S
TARTED
1.39
1
Toll Save Mode
Using the
Toll Save
button on the control panel, you can quickly
set your machine to send the document(s) stored in the memory
during the preset time slot, when the call charge is lowered. This
Toll Save mode helps you to take advantage of lower long
distance rates at night, for example.
NOTE
: The toll-saving time slot may vary depending on your
contract with a long distance phone company.
To turn the toll save mode on:
1
Press
Toll Save
. The button backlight turns on.
2
Press
Enter
when “Start Time” displays on the bottom line.
3
Enter the time when your machine starts sending toll save
faxes, using the number keypad.
To select “AM” or “PM” for 12-hour format, press the or
button or any number button.
4
Press
Enter
when the starting time on the display is
correct.
5
Press the scroll button (
W
or
X
) to display “End Time” and
press
Enter
.
6
Enter the time when the toll save transmission ends, using
the number keypad.
7
Press
Enter
to save the setting.
8
To return to Standby Mode, press
Stop/Clear
.
Once Toll Save mode is activated, your machine stores all of the
documents to be faxed into the memory and sends them at the
programed time.
To turn Toll Save mode off, press
Toll Save
again. The button
backlight turns off and the mode is deactivated.
NOTE
: Once the toll-saving time is set, the
Toll Save
button
allows you to only enable or disable Toll Save mode. To change the
time setting, use the Toll Save item in the
Advanced Fax menu.
See page 6.34.