Filter
Top Products
Beyond the basics
Erasing a document stored in a batch box
It’s easy to erase a document stored in a batch box set up on your fax machine:
1
Press /
PROGRAM
,
N
, 6,
ENTER
. The
LCD
will show:
2
Use the numeric keypad to enter the number (1–5) of the batch box currently
“holding” the document you wish to erase.
3
Press
ENTER
. The
LCD
will show:
4
Use the numeric keypad to enter the document’s two-digit file number (00–39).
If the file number is 00–09, be sure to enter the leading zero.
5
Press
ENTER
. The fax machine now gives you one last chance to change your
mind about the erasure.
Important: To quit the operation without erasing this particular document,
press /
PROGRAM
and go back to step 4.
Important: To quit the operation without erasing this or any other docu-
ment, press
STOP
. The machine will return to standby mode.
6
Press
ENTER
. The fax machine will erase the desired document, then return to
standby mode.
Erase Batch Doc.
Check Program/Enter
Erase Batch Doc.
Enter File No. _
Erase Batch Doc.
Enter Box No. _
2.27