Filter
Top Products
LM-3000 USER’S MANUAL - page 3
V. CABLE CONNECTION
Attention : Never connect the cable while power on!
The cable length is 1.5 M, that allows the user to arrange the LM-
3000 at any place within this range from the PC. At one end of the
cable attached is a SCSI 50 pin connector, at the other end, the
connections are already installed to the rear of the LCD panel. Route
the cables via the rear part of the base and clip them to the grooves to
ensure that no excess strain passes to the cable connection to the
panel. The user shall first press the two springs of the 50 pin SCSI
type connector then connect the connector to the SVGA adaptor card
and latch the connector.