Filter
Top Products
LM-3000 USER’S MANUAL - page 4
VI. UTILITY INSTALLATION
A. For Windows 3.1
The drivers for Windows 3.1 are delivered in a separate 3.5”
floppy diskette with the LCD monitor. To install the drivers for
Windows 3.1 with the LCD monitor, the user should make sure that
the Windows 3.1 is running properly using standard VGA driver.
1. Select the MAIN group in Program Manager.
2. Click on FILE or press ALT + F.
3. Click on RUN or press R to select command line.
4. Type in “A:\SETUP” with the diskette containing drivers for
Windows 3.1 inserted in FDD A: (if it is in B: drive, type in
“B:SETUP” instead), and then press ENTER.
5. Choose for the language applicable.
6. Press any key when being asked of confirmation to start
installation.
7. Press “ENTER” twice and then press the “END” key to input
the directory to store drivers.
8. Replace the command line “C:\WINDOWS” with the actual
directory of the Windows files if they are not in the directory
C:\WINDOWS. Then press ENTER.
9. Press ESC key followed by Y key to finish the first stage of
installation.
10. To make the installed drivers effective, following procedures
have to be taken out.
11. Select MAIN group in Program Manager again.
12. Select Windows Setup.
13. Click on Options or press ALT + O.
14. Click on Change System Settings or press C.
15. Click on Display or press ALT + D.
16. Select the intended video driver of proper resolution and
colors then press ENTER. The names of the video drivers