Filter
Top Products
LM-3000 USER’S MANUAL - page 6
C. For Windows NT 3.5x
The drivers for Windows NT of versions 3.5x are stored in a
subdirectory named NT35 in the diskette.
1. Run Windows NT Setup from Main Group
2. Choose Option from the menu (Alt-O)
3. Select Change system setting (Alt-C)
4. Choose "Other" under display section
5. Insert display driver disk in appropriate floppy drive
D. For Windows NT 4.0
The drivers for Windows NT of versions 4.0 are stored in a
subdirectory named NT40 in the diskette.
Step 1: Install Windows NT as you normally would for a VGA
display.
First click the Start button, go to Settings and click on Control Panel.
Choose the Display icon and click on the icon. In the Display
Properties window, click on the Settings tab. Then click on Change
Display Type. In the Change Display Type window, click on the
Change button under Adapter Type. This will bring up the Select
Device window.
Step 2: In the Select Device window, click on the Other button.
Enter source directory where the Windows NT driver files are
located. Press <ENTER> and the name of the Chips and
Technologies Video Accelerator driver will appear at the end of
Models list box. Scroll to the end of the list box and double click on
the driver. Once the installation is complete, the system must be shut
down and restarted.