Filter
Top Products
Manual The monitor will not detect signals automatically in this mode.
Select the active input by pressing the input signal selection button
on the monitor's control panel.
* When "1" or "2" is selected, the power saving mode of the monitor activates only
if both PCs are in power saving mode.
The Hood can reduce light reflection for on screen color consistency.
Setup Procedure
1.Attach the top hood to either the left or right hood before attaching
to the monitor. The following figure shows the right hood.
2.Attach the hood to the monitor.
* Attaching one hood and tightening the screws should be completed before going
on to the other hood. The following figure shows the example to begin with the
left hood.
(1) Attach the left hood to the monitor from above and slide it from the side of the
monitor until the hood is firmly positioned against the monitor.
(2) Hold the left hood and tighten two screws on each side.