Filter
Top Products
*
The values shown in the Kelvin are available only as a
reference tool.
*
Adjusting the <Gain> turns the <Temperature> adjustement
"OFF".
*
Setting the temperature under 4,000 K or over 10,000 K
invalidates the color temperature setting. (The color
temperature's setting turns "OFF".)
Gamma To set the gamma value 1.8 ~ 2.6 (in 0.2 increments)
* If setting the gamma value, the using the monitor in the
digital signal input is recommended.
If using the monitor in the analog input signal, set the gamma
value from 1.8 to 2.2.
Saturation
To change the saturation -100 ~ 100
Setting the minimum level (-100)
turns the image to the monochrome.
*
The <Saturation> adjustment may cause undisplayable color
tone.
Hue
To change the flesh color, etc. -100 ~ 100
*
The <Hue> adjustment may cause undisplayable color tone.
Gain
To change each color (red,
green and blue)
10 ~ 100%
By adjusting the red, green and blue
color tones for each mode, custom
colors can be defined. Display a
white or gray background image and
adjust the <Gain>.
*
The values shown in the percentage are available only as a
reference tool.
*
Setting the <Temperature> invalidates the <Gain>
adjustment. <Gain> setting returns to the default setting.
6 colors
To adjust <Saturation> and
<Hue> in each color (Red,
Yellow, Green, Cyan, Blue
and Magenta)
Hue: -100 ~ 100
Saturation: -100 ~ 100
Reset
To return the color settings of
the selected mode to the
default settings
Select the <Reset>.