Filter
Top Products
7. Horizontal bars of
distortion appear.
[ ] Decrease the horizontal bars using the
<Phase>.
8. Letters and lines appear
blurred.
[ ] Adjust the blurred lines using <Smoothing>.
9. Distortion appears like the
figure below.
[ ] This happends when both composite (X-OR)
input signal and separate vertical
synchronizing signal are input. Please select
one of the two.
10.The screen is too bright
or too dark.
[ ] Adjust the <Brightness> (The backlight of
the LCD monitor has a fixed life span. When
the screen becomes dark or begins to flicker,
please consult your dealer.)
11. Afterimages appear.
[ ] When the screen image is changed after
displaying the same image for a long period,
an afterimage may appear. The "Afterimage"
can be removed gradually by changing the
displayed image. Use the <Off Timer>
function and avoid keeping the screen on all
the time.
12.The screen has defective
pixels (e.g. slightly light
or dark).
[ ] This is due to the characteristics of the panel
itself, and not the LCD product.
13.Fingerprints remain on
the screen.
[ ] Leaving the screen white may solve the
problem.
14.The noise appears on the
screen.
[ ] Change the mode in <Signal Filter> in the
<Screen> menu.