Filter
Top Products
E
57
2 USING THE SCREENMANAGER
1 The Input Priority function does not automatically re-activate when the
monitor has been in the power saving mode.
2 The Input selection button on the front panel can be used to select
either Signal 1 or Signal 2 as the active input at any time.
Procedure for Input Priority Selection
Please set the Input priority using the following procedure:
(1)Select the “Input priority” icon and push the Enter button to show the
“Signal 1/Signal 2/ Manual” select menu.
(2) Set the signal priority using the right and left buttons.
(3) Push the Enter button to return to the “Others” menu.
(4) Select the “Return” icon and push the Enter button to return to the
main menu of the ScreenManager.
(5)Select the “Exit” icon and push the Enter button to exit the
ScreenManager.
Off Timer
The Off Timer function allows the user to set the time in which the
monitor will be in operation, called the “On Period” and automatically
shifts the operation into the “Power Off” mode when the set “On
Period” expires.
The Off Timer function was created to reduce after-image characteristics
that are particular to LCD monitors when the monitor screen is left on
for a long period without use.
The default setting for the Off Timer is “disable”. For setup, please see
below.
The Off Timer will work while PowerManager is active, but there would be
no advance notice before the monitor’s power switches off.