Filter
Top Products
58
2 USING THE SCREENMANAGER
Setup Procedure
(1)Select the “Off Timer” icon and press the Enter button to display
“Off Timer” select menu.
(2)Select “Enable” and press the enter button.
(3)Press the right/left key to adjust how long (1 to 23 hours) the monitor
should be in the “On Period”. Then, press the enter button to return
to the “others” menu.
(4) Select the “Exit” icon and push the Enter button to exit the
ScreenManager.
Advance notice (beep with LED flashing green) will be given 15 minutes
before the monitor will automatically turn off and enter the “Power Off”
modes . To turn off the beeper, see page 59.
To Delay Entering Power Off
To delay entering the “Power Off” mode, press the power button on
the front panel located to the left of the LED light during the advance
notice period. The monitor will continue to operate for an additional
90 minutes. There will be another advance notice for 15 minutes as
described. Delayed entrance into the “Power Off” period can be
extended as many times as desired.
(Example)
Power Off
Operation Mode
(1) LED Solid Green
(2) LED Flashing Green
2 Beeps every 15
seconds
(3) LED Flashing Yellow
Main Power Off
Press the
Main Power
on
Advance
Notice
End of
“On Period”
Press the
Power Button
Advance
Notice
Press the
Power Button
Advance
Notice
End of
“On Period”
12 hrs.
12 hrs.
90 min.
15 min.
15 min.
Advance
Notice
mode
Advance
Notice
mode
Advance
Notice
mode