Filter
Top Products
English
2. CABLE CONNECTION
13
2-2. Connecting the signal cable
NOTE
• Be sure that the power switches of both the PC and the monitor are OFF.
1. Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Signal Cable Connector PC
Signal Cable (FD-C16
enclosed)
Video Output
Connector D-Sub mini
15 pin
Standard graphics card
Macintosh G3 (Blue & White)
/ G4
Signal Cable (FD-C16
enclosed) + Macintosh
Adapter (Optional)
Video Output
Connector D-Sub 15
pin
Macintosh
Macintosh Adapter (Optional)
Digital Input
Signal Cable Connector PC
Signal Cable (FD-C04
enclosed)
Video Output
Connector DVI-I
Digital graphics board
NOTE
• The monitor is not compatible with a Power Macintosh G4/G4 Cube ADC
(Apple Display Connector)
2. Plug the power cord into the power connector on the rear of the
monitor.
Power Cord