Filter
Top Products
2. INSTALLATION 11
ENGLISH
2. Plug the power cord into the power connector at the rear of the
monitor. Then, plug the other end of the cord into a power outlet.
3. Turn on the monitor first, then the PC.
The monitor’s power indicator will light up (green). The monitor will warm up
briefly, then display an image. Whenever finishing your operation, turn off the
PC and the monitor.
(If an image does not appear, make sure that all connections have been made
properly. Refer to the “TROUBLESHOOTING” (See page 22) for additional
advice).
• Generally, for maximum viewing comfort, position the
monitor slightly below eye level. Staring at the monitor
for prolonged periods can cause eyestrain. Be sure to
take adequate rests.
(A 10-minute rest period each hour is suggested).
• Use the enclosed power cord and connect to the standard
power outlet of your country. Be sure to remain within
the rated voltage of the power cord.
Not doing so may cause in fire or electric shock.
• The equipment must be connected to a grounded main
outlet.
Not doing so may cause in fire or electric shock.
WARNING
WARNING