National Instruments 1000DC Personal Computer User Manual


 
Chapter 2 Configuring and Installing the SCXI Chassis
© National Instruments Corporation 2-11 SCXI Chassis User Manual
Selecting Voltage and Replacing the Fuse for the SCXI-1000
and SCXI-1001
If you ordered the chassis with the appropriate part number (the -0x
extension of the kit part number corresponds to your geographical region),
the voltage tumbler and fuse are correct for operation in your geographical
region. Check the voltage on the voltage tumbler to ensure that you have
the correct voltage tumbler setting and fuse.
The SCXI chassis can operate with line voltages of 100, 120, 220, and
240 VAC. The voltage tumbler in the power entry module determines the
voltage for which the chassis is configured. You can identify the operating
voltage by looking at the number on the power entry module when the door
that covers the tumbler is closed. The fuse is 5 × 20 mm, which has a
current rating relative to the operating voltage. Table 2-4 shows the proper
voltage selections and fuse ratings for different regions.
Caution For continued protection, replace fuses only with fuses of the same type and
rating.
Table 2-4. SCXI-1000/1001 Voltage Selection and Fuse Ratings by Region
SCXI
Chassis
Type
Region/Voltage
Main
Power Fuse
Quantity
Main Power
Fuse Type
Backplane
Fuse
Quantity
Backplane
Fuse Type
SCXI-1000 100 V Japan 1 3/4 A 250 V 5 mm ×
20 mm SLO-BLO
2 1.5 A 125 V LittleFuse
R251 01.5 TI
120 V 1 1/2 A 250 V 5 mm ×
20 mm SLO-BLO
2 1.5 A 125 V LittleFuse
R251 01.5 TI
220 V Swiss 1 1/4 A 250 V 5 mm ×
20 mm SLO-BLO
2 1.5 A 125 V LittleFuse
R251 01.5 TI
240 V Australia 1 1/4 A 250 V 5 mm ×
20 mm SLO-BLO
2 1.5 A 125 V LittleFuse
R251 01.5 TI
240 V Europe 1 1/4 A 250 V 5 mm ×
20 mm SLO-BLO
2 1.5 A 125 V LittleFuse
R251 01.5 TI
240 V North American 1 1/4 A 250 V 5 mm ×
20 mm SLO-BLO
2 1.5 A 125 V LittleFuse
R251 01.5 TI
240 V U.K. 1 1/4 A 250 V 5 mm ×
20 mm SLO-BLO
2 1.5 A 125 V LittleFuse
R251 01.5 TI