Filter
Top Products
Chapter 2 Installation
© National Instruments Corporation 2-3 GPIB-SCSI-A for Solaris
The default settingsof switches 1through 3are ON, OFF, ON, respectively,
to selectthe SCSI ID of 5. Switches 4 through 8 are OFF, indicating that the
GPIB primary address of the GPIB-SCSI-A is 0.
Tables 2-1 and 2-2 show the possible configurations of the eight switches
for SW1 and what each configuration indicates. Factory default settings are
in bold.
Table 2-1. SW1 Configuration Parameters for Switches 1 through 3
Switches
Indication1 2 3
OFF OFF OFF SCSI ID of 0
OFF OFF ON SCSI ID of 1
OFF ON OFF SCSI ID of 2
OFF ON ON SCSI ID of 3
ON OFF OFF SCSI ID of 4
ON OFF ON SCSI ID of 5
ON ON OFF SCSI ID of 6
ON ON ON SCSI ID of 7
Table 2-2. SW1 Configuration Parameters for Switches 4 through 8
Switches
Indication4 5 6 7 8
OFF OFF OFF OFF OFF GPIB Primary Address 0
OFF OFF OFF OFF ON GPIB Primary Address 1
OFF OFF OFF ON OFF GPIB Primary Address 2
OFF OFF OFF ON ON GPIB Primary Address 3
OFF OFF ON OFF OFF GPIB Primary Address 4
OFF OFF ON OFF ON GPIB Primary Address 5
OFF OFF ON ON OFF GPIB Primary Address 6
OFF OFF ON ON ON GPIB Primary Address 7
GS.book Page 3 Tuesday, June 12, 2001 2:17 PM