Filter
Top Products
© National Instruments Corporation 1-1 GPIB-SCSI-A for Solaris
1
Introduction
This chapter explains how to use this manual, lists what you need to get
started, and briefly describes the GPIB-SCSI-A and NI-488.2 for Solaris.
What You Need to Get Started
❑
Solarisversion2.5.1orhigherinstalledonyourSunSPARCsystem
❑
One of the following GPIB-SCSI-A boxes:
– 100–120 VAC
– 220–240 VAC
❑
One of the following power cords:
– U.S.A. standard power cord
– U.K. power cord
– Switzerland power cord
– Australian power cord
– Universal European power cord
– North American power cord
❑
Standard 50-pin SCSI-1 terminator
❑
Type SCSI-G Cable: GPIB-SCSI-A (50-pin SCSI-1) to Sun SPARC
system (SCSI-2 50-pin)–1m
❑
NI-488.2 for Solaris and GPIB-SCSI-A, Version 2.x CD
❑
Super-user privilege
❑
One of the following shielded GPIB cables, which you can purchase
from National Instruments:
– Type X1 single-shielded cables (1, 2, or 4 m)
– Type X2 double-shielded cables (1, 2, or 4 m)
GS.book Page 1 Tuesday, June 12, 2001 2:17 PM