National Instruments NI 9215 Network Card User Manual


 
© National Instruments Corp. 3 NI 9215 Operating Instructions and Specifications
Hot Surface This icon denotes that the component may be
hot. Tou ching this component may result in bodily injury.
Safety Guidelines for Hazardous Voltages
Yo u can connect hazardous voltages only to the NI 9215 with
screw terminal. Do not connect hazardous voltages to the NI 9215
with BNC.
If hazardous voltages are connected to the module, take the
following precautions. A hazardous voltage is a voltage greater
than 42.4 V
pk
or 60 VDC to earth ground.
Caution Ensure that hazardous voltage wiring is
performed only by qualified personnel adhering to local
electrical standards.
Caution Do not mix hazardous voltage circuits and
human-accessible circuits on the same module.
Caution Make sure that devices and circuits connected to
the module are properly insulated from human contact.
Caution When module terminals are hazardous voltage
LIVE (>42.4 V
pk
/60 VDC), you must ensure that devices