National Instruments NI 9215 Network Card User Manual


 
NI 9215 Operating Instructions and Specifications 6 ni.com
Caution For Zone 2 applications, connected signals must
be within the following limit:
Capacitance..........................0.2
μF max
Special Conditions for Hazardous Locations Use in Europe
This equipment has been evaluated as EEx nC IIC T4 equipment
under DEMKO Certificate No. 03 ATEX 0324020X. Each module
is marked II 3G and is suitable for use in Zone 2 hazardous
locations. If you are using the NI 9215 in Gas Group IIC hazardous
locations or in ambient temperatures of –40 °C Ta 70 °C, you
must use the device in an NI chassis that has been evaluated as
Ex nA IIC T4 equipment.
Special Conditions for Marine Applications
Some modules are Lloyd’s Register (LR) Type Approved for
marine applications. To verify Lloyd’s Register certification, go
to
ni.com/certification and search for the LR certificate,
or look for the Lloyd’s Register mark on the module.