National Instruments TPC-2012 Personal Computer User Manual


 
© National Instruments Corporation F-1 TPC-2012 User Manual
F
Touchscreen Configuration
This appendix explains how to configure the TPC-2012 touchscreen using
the PenMount Control Panel.
Touchscreen Calibration
To calibrate the TPC-2012, go to Start»Control Panel»Stylus, which
displays the Stylus Properties screen. You can set the double-tap sensitivity
in the Double-Tap tab. To recalibrate the stylus, use the Calibration tab.
Press the Recalibrate button, then press and briefly hold the stylus on the
center of each target as it appears on the screen. When finished, tap on the
screen with the stylus to save the settings.