Filter
Top Products
6-5
System Settings
Displays the general information on the system.
Maximum number of stations (incl. Host) : Displays the
maximum number of stations that can be connected to the
host computer.
Current number of additional stations : Displays the number
of users that are connected to the host computer and is
currently being used.
This machine : Displays the name of the host computer. The
name of the computer can be changed by using the
<Computer name> option at the Windows system registration
information menu.
This user : Displays the names of the users who have logged on
the host computer.
System uptime : Displays the logon period of the host
computer's operating system.
Main Station AutoLogon : Displays an option to automatically
start the stations, which are connected to the host computer, at
boot-up.
Delay until shutdown (seconds) : The shutdown time of
each station when the host computer shuts down can be set.
The range of the input value is from 1 second to 999
seconds.
Disable Send Broadcast Message : Displays an option that
can activate or deactivate the message sending mode for
each station.
Prevent access of the USB-storage devices to the
attached terminal.
: Displays an option which can activate
or deactivate the USB-storage devices.
Remote View/Control allowed : Displays an option that an
administrator can view or control the PC Expanion remotely.
Clean up disconnected sessions not in use : Display an
option that the session can be terminated, if the user does
not log on again after disconnecting.
Support WTSAPI32 Interface : A program, which uses the
Windows RDP function, can be selected by using this mode.
If this feature is enabled, all NComputing protocols are
automatically converted to RDP-compatible formats. Use
this for Terminal Services Compatibility issues.
Disable background-bitmaps under Windows XP :
Displays an option which can display the background image
under the Windows XP operating system.
Administrator Password : Entering a password to use the
NCX-2000-XP program can be activated or deactivated by
using this mode. If the user does not wish to have a
password, the 'Disable Password Protection' must be
selected.