Filter
Top Products
8-23
The station screen appears where the user can set the resolution
and color depth on the PC Expanion.
3
To view a station screen, go to in the “UTMA/UTSA Devices list”
window. Go to <Start> <All Programs> <NCT-2000-XP>
<NCT-2000-XP Console>. Select <Hardware Settings (Local/LAN)>
<Device>, select the corresponding PC Expanion from the
device list and then click <View User Screen view> at the bottom
of the screen.
4
The administrator can control a PC Expanion that is connected to the host
PC remotely.
13. How to control a running PC Expanion by the
administrator
After referring to ‘12. How to see the screen of running PC Expanion’ in
Part 8, run the “View station” option.
1
When the screen of the station displays, move the mouse point to the
title bar of window.
Then click the right mouse button. Two options are displayed:
Controlled By TS Admin : If this option is selected, an administrator
can control the PC Expanion remotely.
User Input Allowed : This option is selected by default. If this option is
selected, you can use a keyboard and mouse on
the PC Expanion. If this option is unselected, a
user cannot use a keyboard and mouse but can
only view the screen.
If the user selects the option
above, it is difficult to use the
keyboard and the mouse because
both the user’s keyboard/mouse
and the administrator’s keyboard/
mouse are given equal access to
operate simultaneously.
2