Filter
Top Products
7156 Setup and User’s Guide Chapter 2: Setting Up and Using the Printer
September 1998 13
Loading and Changing the Receipt Paper
Although the illustrations show a used roll being removed, the instructions apply
to loading paper for the first time.
Change the paper when either of the following two conditions occurs:
Paper Status LED (red) flashes: the paper is low
There are approximately 1 ½ to 7 ½ meters (5-25 feet) of paper remaining on
the roll. Change the paper as soon as possible to avoid running out part way
through a transaction.
Depending on the application program, the host computer may alert you when
the paper is low.
Paper Status LED (red) turns on: the paper is out
Change the paper immediately or data may be lost.
Caution: Do not operate the printer or host computer if the printer runs out of
paper. The printer will not operate without paper, but it may continue to accept
data from the host computer. Because the printer cannot print any transactions, the
data may be lost.