NDC comm NWH6210 Network Card User Manual


 
Power
Reset
Figure 7. NWH6210 Rear Panel
Connectors
Connector Function
DC Input
DC 5V input
Ethernet
Standard RJ-45 Ethernet connector
Rest Button
Resets the device if pressed for 1
second. Reboots and loads the factory
default settings after a long press (over 5
seconds). The Power LED blinks
during reset, and goes off once the reset
is complete
Antenna Connector
Reverse SMA connector for Antenna
(NWH6210 only)
DC-In Port
Ethernet Port Antenna Connector
InstantWave 11Mbps
WWB/WEC
25