Filter
Top Products
Hardware Pre-Configuration
Before adding a Wireless Workgroup Bridge (WWB) or Wireless Ethernet Client
(WEC) into an existing Ethernet network, you may need to set basic configurations,
e.g. domain name (SSID), security setting (WEP), WWB (or WEC) name, channel
number, or IP address in order to make it compatible with the existing network.
Follow the steps below to connect the WWB (or WEC) to a PC for configuration:
step1. Use a standard Ethernet cable to connect a PC to an Ethernet port on the
WWB (or WEC)
step2. Power on the WWB (or WEC)
Install the InstantWave Management System
step1. Insert the InstantWave CD into the CD-ROM drive. The InstantWave
CD main menu will open automatically
Figure 10. Welcome
step2. Click Install Utility to install the InstantWave Management System
(IWMS) utility to your system
InstantWave 11Mbps
WWB/WEC
27