Filter
Top Products
Upgrade Firmware
Upgrade Firmware
The WWB’s or WEC’s embedded software (firmware) is burned into the flash
ROM. However, an updated firmware can be installed over your LAN via the
IWMS program. Click on Upgrade Firmware. The Upgrade Firmware dialog
box will open (Figure 29).
Use the Browse button to choose the file to be uploaded to the WWB or WEC, or
type the file name and path in the Select File field.
Figure 29. Upgrade Firmware
The Upgrade button will then become enabled. Click Upgrade to start uploading
the file to the WWB. The IWMS and the WWB’s (or WEC’s) built-in Trivial
File Transfer Protocol (TFTP) command will upload the new executable into the
WWB’s or WEC’s flash memory area. If the upload activity fails, an error
message will be shown on the message box. When the file transfer is complete,
click Close to close the window.
InstantWave 11Mbps
WWB/WEC
47