NEC 2300 DL Printer User Manual


 
Status, Error, and Service Messages104
PRINTER COVER
OPEN
Printer’s front door is
open and must be
closed.
Close the front door.
PUT X IN TRAY Y SIZE Put X (paper or media
type) in Tray Y (Tray 1
or 2 as specified).
Install the correct media
size or type into the tray
specified.
PUT X IN TRAY Y Put X (paper or media
type) in Tray Y (Tray 1
or 2 as specified).
Install the correct media
type into the tray
specified.
SIZE MISMATCH The media size set
with the printer driver
is different from the
size of media loaded.
Install the correct media
size.
SIZE/TYPE ERROR The media size or
type set with the
printer driver is
different from the type
of media loaded into
Tray 1.
Install the correct media
size or type.
SIZE/TYPE ERROR
DUPLEX
The media size or
type set with the
printer driver is
different from the type
being duplexed.
Use the correct media
size or type when
duplexing.
TONER EMPTY
COLOR
The COLOR
(specified
color) toner cartridge
is empty.
Replace the toner
cartridge. (Engine/
Replace Toner)
TRAY X EMPTY Tray X (Tray 1 or 2)
was specified with the
printer driver for
printing, but Tray X is
empty.
Install media into the
tray specified.
TRAY 2
NOT ATTACHED
Tray 2 was specified
with the printer driver
for printing, but Tray 2
is not attached to the
printer.
Stop the print job, and
then either change the
printer driver setting or
attach Tray 2 to the
printer.
TRAY 2 LOW Tray 2 is almost out of
media.
Prepare more media to
replenish the tray.
WASTE: NEAR FULL The waste toner
bottle is nearly full.
Install a new waste toner
bottle.
This message... means... do this...