Filter
Top Products
8 SuperScript Color Laser Network Guide
T
ESTING
THE
NIC
Follow these steps to verify that the NIC is installed and
operating properly.
1. Connect the network’s twisted pair cable with RJ-45
connectors to the new network port on your printer
(A)
.
Reattach the power cord to the printer
(B)
, plug in the
printer.
2. Turn on the printer
(C)
. It may take up to 90 seconds to
warm up, and then it prints a Network Settings page
with NIC status information.
note:
Keep the Network Settings page. You will need
this information when configuring the NIC for your
network.
A
B
C
Connecting the NIC
The SuperScript Color Laser is now a network
printer. The rest of this guide gives information for
configuring your system to use the network printer.