Filter
Top Products
18 SuperScript Color Laser Network Guide
Unit Status: Click here to view the current state for each
protocol and NIC port available on your NIC. For each
supported protocol (Novell NetWare, TCP/IP, or
AppleTalk), the top line displays the protocols supported
and if the protocol is enabled or disabled.
Network Address: Click here to view the serial number
and the Ethernet MAC (Media Access Control) address
for the NIC.
Change Password: Changing any parameters using the
Network Administration Page requires a password. Click
here to change your password. The default password is
sysadm. Your password can contain letters, numbers, and
punctuation, and is case sensitive.
note: If you forget your password, you can restore the
NIC to its factory defaults manually. See page 10.