Filter
Top Products
NEC VERSA E3100 Disassembly Manual
Page 20
Removing the Main Board
To remove the Main Board, first remove the Top Cover Assembly (see Removing Top Cover
Assembly) then perform the following steps:
1. Remove the 6 screws and detached the three connectors as shown on Fig 23
Fig. 23 Removing screws and the connectors on the main board
2. Remove the two hex screws from the VGA port as shown in Fig. 24
Fig. 24 Removing the two hex screw
M2.5X4.5 Black
M2.5X5 Silver