Filter
Top Products
NEC VERSA E3100 Disassembly Manual
Page 23
Removing the MDC Modem
To remove the MDC Modem, first remove the main board (see Removing Main Board) then
perform the following steps:
1. Unscrew the two screws and disconnect the connector as shown on Fig. 28
Fig. 28 Removing MDC modem
Removing the Touch Pad
To remove the touch pad, first remove the top cover (see Removing the Top Cover), then
perform the following steps:
1. Unscrew the screws on the Top Cover as shown in Fig. 29
Fig. 29 Removing the Inverter Board
M2.5X4.5 Black
M2X4 Silver