Filter
Top Products
1-13
11
Monitor MultiSync
®
FE991
SB
Notes
Specifications Monitor
Picture Tube Diagonal: 19 inch 90° deflection, 0.25/0.27 mm grille pitch,
Viewable Image Size: 18 inch medium short persistence phosphor,
Radius: 50,000 mm aperture grille CRT, multi-layered,
anti-static screen coating, dark-tint screen
and OptiClear
®
screen.
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Display Colors Analog input: Unlimited number of Colors Depends on display card used.
Synchronization Horizontal: 30 kHz to 96 kHz Automatically
Range Vertical: 50 Hz to 160 Hz Automatically
Resolutions Supported 640 x 480 @ 60 to 160 Hz
Some systems may not support
Resolution based on
horizontal and
800 x 600 @ 50 to 146 Hz
all modes listed.
vertical frequencies only
832 x 624 @ 50 to 141 Hz
1024 x 768 @ 50 to 116 Hz
NEC-Mitsubishi Electronics Display cites
1152 x 870 @ 50 to 103 Hz
recommended resolution at 85 Hz for
1280 x 1024 @ 50 to 89 Hz .....................
optimal display performance.
1600 x 1200 @ 50 to 76 Hz
1792 x 1344 @ 50
to
68 Hz
Active Display Area Horizontal:
356 mm/14.0 inches Dependent upon signal timing used,
(Factory Setting) Vertical:
266 mm/10.5 inches and does not include border area.
Active Display Area
366 mm/14.4 inches Dependent upon signal timing used,
(Full Scan)
274 mm/10.8 inches and does not include border area.
Power Supply
AC 100 – 240 V, 50-60 Hz
Current Rating 2.2A @ 100-240 V
Dimensions
442 mm (W) x 443 mm (H) x 447.5 mm (D)
17.4 inches (W) x 17.4 inches (H) x 17.6 inches (D)
Weight 22.7 kg
50.0 lbs
Environmental Considerations
Operating Temperature: +5°C to +35°C / +50°F to +90°F
Humidity: 10% to 90%
Feet: 0 to 10,000 Feet
Storage Temperature: -20°C to +60° C / -4°F to +140°F
Humidity: 10% to 90%
Feet: 0 to 50,000 Feet
NOTE: Technical specifications are subject to change without notice.
Specifications
–continued