Filter
Top Products
E–24
STATUS
POWER
ON/
STAND BY
SOURCE
3.OPERATION
AC IN
PC CARD
USB
VIDEO
S-VIDEO
RGB
AUDIO
PC CONTROL
M
E
N
U
E
N
T
E
R
C
A
N
C
E
L
SELECT
AUTO
ADJUST
PC CARD ACCESS
STATUS
POWER
ON/
STAND BY
SOURCE
1
Connect the supplied power cable to the projector.
2
Turn on and off the Projector
3
Connecting the Power Cable and Turn on the Projector
POWER ON/STAND BY button
Indicator
To turn on the projector:
Only after you press the "ON/STAND BY" button on the pro-
jector cabinet or "POWER ON" button on the remote control
will the power indicator turn to green and the projector be-
come ready to use.
NOTE: To turn the projector on by plugging in the power cable, use
the menu and enable the “Auto Start” feature. (See page E-39.)
NOTE: Immediately after turning on the projector, screen flicker may
occur. This is not a fault. Wait 3 to 5 minutes until the lamp lighting
is stabilized.
To turn off the projector:
First press the Power (ON/STAND BY) button on the projec-
tor cabinet or the POWER OFF button on the remote control
for a minimum of two seconds. The power indicator will glow
orange. After the projector turns off, the cooling fans keep
operating for 90 seconds.
NOTE: Do not disconnect the power cable during this time. Then,
unplug the power cable. The power indicator will go out.
Power button
M
E
N
U
E
N
T
E
R
C
A
N
C
E
L
OFF
VIDEO
AUTO ADJ.
S-VIDEO RGB1 RGB2
LASER
ON
SELECT
POWER
POWER
POWER
ON
/
STAND BY
POWER
Status of indicator light: turn on
Status of indicator light: turn off
ON
cooling down stand by
steady green light
change to flashing
green light
steady orange light
press a minimum of
two seconds
VIDEO S-VIDEO RGB1 RGB2
PC CARD
S-VIDEO
RGB
P
E
N
T
E
R
AUTO
ADJUST
PC CARD ACCESS
D
BY
SOURCE
Select the Computer or Video Source
Adjust a Projected Image
Plug the supplied power cable in the wall outlet. The projec-
tor will go into its standby mode and the power indicator will
glow orange.
Before you turn on your projector, ensure that the computer or video
source is turned on and that your lens cap is removed.
Normal mode:
Eco modo:
POWER
STATUS
POWER
STATUS
ON
/
STAND BY
POWER
STATUS
stand by
steady orange light
flashing green light
for one minute.
steady green light
POWER
STATUS
POWER
STATUS
ON
/
STAND BY
POWER
STATUS
stand by
steady orange light
flashing green light
for one minute.
(Normal mode)
steady green light
(Eco mode)