NEC LT240 Projector User Manual


 
E-110
USING ON-SCREEN MENU
Ͼ
Menu Descriptions & Functions
Entry
To assign your passcode:
NOTE: Up to 15 digits can be assigned.
1. Select [Entry] and press the ENTER button. The [Entry] screen will be
displayed.
2. Type in a combination of SELECT buttons ̆̄̇̈ and press the EN-
TER button.
The [Confirm Passcode] screen will be displayed.
3. Type in the same combination of SELECT buttons ̆̄̇̈ and press the
ENTER button.
Your passcode has been assigned.
Delete
To delete your passcode:
1. Select [Delete] and press the ENTER button. The [Delete] screen will be
displayed.
2. Type in your passcode and press the ENTER button.
Your passcode has been deleted.
In case you forget your passcode, follow the steps below to delete it.
1. Select the Advanced menu from the Basic/Custom menu. The Passcode
entry screen will be displayed.
2. Press the SELECT ̆ (up) button four times and then press the ENTER
button.
The "Warning Passcode!!" message will be displayed.
3. Press the SELECT ̄ (down) button four times and then press the EN-
TER button.
The "Warning Passcode!!" message will be displayed.
4. Press the SELECT ̈ (right) button four times and then press the EN-
TER button.
The "Delete Passcode / Are you sure?" message will be displayed.
Use the SELECT ̇ or ̈ button to select "Yes" and press the ENTER
button. Your passcode has been deleted.