NEC LT240 Projector User Manual


 
E-89
USING ON-SCREEN MENU
Ͼ
Menu Descriptions & Functions
NOTE:
*When "Resolution" is set to "Native", "3D Reform", "Aspect Ratio" and
"Screen" are not available.
* If you are displaying an image with a resolution higher than the projector's
native resolution (i.e. 1024ן768 for LT260/240 and 800ן600 for LT220)
and "Native" mode is selected in the menu system, the portion of the image
that lies off screen will be lost because of a change in the horizontal-to-
vertical ratio. This is due to the image having a larger horizontal resolu-
tion than the panels native resolution. This is not a malfunction and it can
be corrected using the 'Phase' adjustment in the menu system. After ad-
justing 'Phase', set the resolution mode to "Auto".
Selecting Overscan Percentage
Select overscan percentage (0%, 5%, 10% and 25%) for signal.
NOTE: When "Resolution" is set to "Native", this feature is not available, and
the stored settings and adjustments are invalid.
NOTE: When "4:3 Fill" or "Crop" is selected in "Aspect Ratio", this feature is
not available.
Selecting Video Filter Level (not available for Video, Viewer and LAN)
This function reduces video noise.
Off ................... The filter is removed.
Less ................ The low-pass filter is applied partially.
More ................ The low-pass filter is applied fully.
Selecting Noise Reduction Level (not available for RGB, Viewer and LAN)
Select one of the three levels for reducing video noise: Low, Medium or
High.
NOTE: The lower the Noise Reduction level, the better the image quality by
way of higher video bandwidth.