Filter
Top Products
Command Line Interface 32
System Information Menu
Command: /info/sys
[System Menu]
snmpv3 - SNMPv3 Information Menu
general - Show general system information
log - Show last 100 syslog messages
user - Show current user status
dump - Dump all system information
The following table describes the System Information Menu options.
Table 16 System Information Menu options
Command Usage
snmpv3 Displays the SNMP v3 Menu.
general Displays system information, including:
• System date and time
• Switch model name and number
• Switch name and location
• MAC address of the switch management processor
• IP address of IP interface
• Hardware version and part number
• Software image file and version number
• Configuration block name
log Displays 100 most recent syslog messages.
user Displays the User Access Information Menu.
dump Dumps all switch information available from the Information Menu (10K or more, depending on
your configuration).
SNMPv3 Information Menu
Command: /info/sys/snmpv3
[SNMPv3 Information Menu]
usm - Show usmUser table information
view - Show vacmViewTreeFamily table information
access - Show vacmAccess table information
group - Show vacmSecurityToGroup table information
comm - Show community table information
taddr - Show targetAddr table information
tparam - Show targetParams table information
notify - Show notify table information
dump - Show all SNMPv3 information
SNMP version 3 (SNMPv3) is an extensible SNMP Framework that supplements the SNMPv2 Framework by
supporting the following:
• a new SNMP message format
• security for messages
• access control
• remote configuration of SNMP parameters
For more details on the SNMPv3 architecture, see RFC2271 to RFC2276.
The following table describes the SNMPv3 Information Menu options.
Table 17 SNMPv3 Information Menu options
Command Usage
usm Displays User Security Model (USM) table information.
view Displays information about view name, subtrees, mask and type of view.
access Displays View-based Access Control information.
group Displays information about the group that includes the security model, user name, and
group name.
comm Displays information about the community table.
taddr Displays the Target Address table.
tparam Displays the Target parameters table.
notify Displays the Notify table.