Filter
Top Products
Command Line Interface 77
HTTPS Access configuration
Command: /cfg/sys/access/https
[https Menu]
access - Enable/Disable HTTPS Web access
port - HTTPS WebServer port number
generate - Generate self-signed HTTPS server certificate
certSave - save HTTPS certificate
cur - Display current SSL Web Access configuration
The following table describes the HTTPS Access Configuration menu options.
Table 78 HTTPS Access Configuration menu options
Command Description
access enable|disable Enables or disables BBI access (Web access) using HTTPS. The default value is
disabled.
port <TCP port number> Defines the HTTPS Web server port number. The default is 443.
generate Allows you to generate a certificate to connect to the SSL to be used during the key
exchange. A default certificate is created when HTTPS is enabled for the first time.
The user can create a new certificate defining the information that they want to be
used in the various fields. For example:
• Country Name (2 letter code) [ ]: JP
• State or Province Name (full name) [ ]: Tokyo
• Locality Name (for example, city) [ ]: Fuchu
• Organization Name (for example, company) [ ]: NEC
• Organizational Unit Name (for example, section) [ ]: SIGMABLADE
• Common Name (for example, user’s name) [ ]: Taro
• Email (for example, email address) [ ]: info@nec.com
You must confirm if you want to generate the certificate. It takes approximately
30 seconds to generate the certificate. Then the switch restarts SSL agent.
certSave Allows the client, or the Web browser, to accept the certificate and save the
certificate to Flash to be used when the switch is rebooted.
cur Displays the current SSL Web Access configuration.
Watchdog configuration
Command: /cfg/sys/watchdog
[Watchdog Menu]
interval - Set watchdog timeout interval
enable - Enable Watchdog
disable - Disable Watchdog
cur - Display current Watchdog configuration
The following table describes the HTTPS Access Configuration menu options.
Table 79 Watchdog Configuration menu options
Command Description
interval <5-120> Sets the watchdog timeout interval. The default is 30 seconds.
enable Enables watchdog. The default is enabled.
disable Disables watchdog.
cur Displays the current Watchdog configuration.