Filter
Top Products
System Configuration 4-25
Monitoring Configuration
Select “monitoring Configuration” on the Server menu and press Enter to display the following
screen.
Option Parameter Description
FRB-2 timer Disabled
[Enabled]
Select whether or not to enable the FRB-2 timer.
Boot Monitoring Disabled
5 minutes
[10 minutes]
15 minutes
20 minutes
25 minutes
30 minutes
35 minutes
40 minutes
45 minutes
50 minutes
55 minutes
60 minutes
Select whether or not to enable the timer for boot
monitoring at startup. If you are starting up from an OS
with no NEC ESMPRO Agent installed, disable this
option. If you use Disaster Recovery Option for
ARCServe, select [Disabled].
Option ROM Scan
Monitoring
Disabled
[Enabled]
Select whether or not to enable the function to monitor
the option ROM scan.
Option ROM
Monitoring Time-out
1-[5]-20 Set the timeout of the option ROM scan. This option is
displayed when the Option ROM Scan menu is set to
[Enabled] (unit: minute).
POST Pause
Monitoring
Disabled
[Enabled]
Set whether or not to enable the POST monitoring
function during boot pause.
POST Pause
Monitoring Time-out
1-[3]-20 Set the time for POST monitoring during boot pause.
This option is displayed when the POST Pause
Monitoring menu is set to [Enabled] (unit: minute).
[ ]: Factory-set