Filter
Top Products
7-40 Troubleshooting
4. Execute the following command:
./xrasutil
ESRAS Utility will start.
5. Select <Backup the current IPMI Information…>.
The IPMI Information Backup screen will appear.
6. Enter an output destination and a comment, and then select [OK].
The information will be output to the specified location.
<Backup File Name>: Specify the path to the file on which you want to save the
information. By default, the information is output to log/ipmi.dat
which is under the directory where NEC ESMPRO Agent is
installed.
<Comment>: Describe the information which you want to output with. (Optional)
For using the Server Maintenance Utility in Japanese, run the command below before starting it.
This command starts X Window and the screen will be displayed in the Japanese fonts.
init 5
If you star the Server Maintenance Utility without starting the X Window, messages displayed on
the console may affect the screen display. If the screen is not displayed properly, press Ctrl + L to
refresh the screen.