Filter
Top Products
Page 14 NDA-30007 Revision 3.0
MAT Assignments Conference Room Scheduler Installation Guide
AOKC COMMAND: (Assignment of OAI Key Codes)
This command is used to associate the MSF facility and its Op-Code that was
configured in the APM for Conference Room Scheduler to one of the 14 OAI Key
Codes in the MAT.
1. Select an unused OAI Key Code, from 1 to 14. To determine what Key Codes
are available for assignment, use the LOKC command to list the AOKC Key
Codes that are already assigned.
2. Enter MSF as the facility to be assigned to the selected Key Code, using the val-
ues on the screen.
3. Enter the same Op-Code that was configured for Conference Room Scheduler
in the APM. If necessary, retrieve it using the Provider command on the APM
Configuration Entry screen.
AKYD COMMAND: (Assignment of D
term
Function Key)
This command is used to assign key data on the D
terms
that are to be used to access
Conference Room Scheduler. MAT Function Key Indexes #34 to #47 have been
designated for use in the OAI system and correspond to the 14 OAI Key Codes as
illustrated on the previous page. The AKYD command is used to assign a D
term
function key to the specific MAT Function Key Index that, in turn, corresponds to
the previously assigned OAI Key Code. This command must be used to assign the
function key on each D
term
that is to be set up with access to Conference Room
Scheduler.
1. Enter the same tenant number that is configured for Conference Room Schedul-
er in the APM Application Configuration option (page 6).
2. Enter the station number of the D
term
on which the function key is being as-
signed.