Filter
Top Products
Netac AirTrack T600 Mini Wireless Router
23
Figure 5.11 PMP Mode Setup Page
Table 5.14 PMP Mode Setup Options
Field Description
Remote Bridge 1-6 MAC address of the remote bridge to which this bridge is connected.
Mode Select 802.11b, 802.11g or Mixed mode.
Domain Select domain. Different domain use different channel.
Channel Select RF channel. Default: Channel 6.
Security
Select Disable (Default) or WEP. Select WEP, and click the Setup button to enter
the WEP configuration page (Figure 5.3).
Advanced Settings Click Setup to configure Advanced Settings (Figure 5.12).
NOTE: Under PMP Mode, you must make sure the related configuration (such as Security, Channel, etc.) of
Remote Bridge is consistent with T600 in order to communicate with each other.
5.4.1 PMP Mode - Security Configuration
To enable security, select WEP in the PMP Mode setup page (Figure 5.11) and click the Setup button to enter
the configuration page.