Netac Tech T600 Network Router User Manual


 
Netac AirTrack T600 Mini Wireless Router
26
MAC Cloning Mode
Enable MAC Cloning Mode. Clones all the MAC addresses of devices connected
to the Ethernet (wired) port to a single MAC address sent out wirelessly to an AP or
Repeater.
SSID
Wireless Network Name. You can enter it directly in this field or click the Site
Survey button to select one from a list of available networks. (Figure 5.14).
Operation Mode Select Ad-Hoc or Infrastructure mode.
Domain Select domain (Ad-Hoc network only). Different domain use different channel.
Channel Select channel (Ad-Hoc network only). Default: Channel 6.
Security
Select Disable (Default), WEP or WPA. Select one, and click the Setup button to
enter the WEP configure page (Figure 5.3) or WPA (Figure 5.4).
Preamble Type Select Short or Long preamble.
Transmit Rate Select transmit rate: fixed rate or Auto.
5.5.1 Client Mode - Site Survey
Clicking the Site Survey button brings up the Site Survey page, which displays the available Access Points
and Ad-Hoc networks in the neighborhood. The user can select the AP or Ad-Hoc network to join. Figure 5.14
and Table 5.18 describe the options.
Figure 5.14 Client Mode - Site Survey Page
Table 5.18 Client Mode - Site Survey
Field Description
Site Survey table
List the available Access Points and Ad-Hoc networks. To select a wireless
network to join, click its radio button.
Scan Start the Site Survey Scan process.