NetComm 3G9W Network Router User Manual


 
74 – YML902
IMSI & IMEI read
Description: Display the IMSI and IMEI value
Synopsis: sierra show --imsi
sierra show --imei
Example:
> sierra show --imsi
imsi: 466974800524867
> sierra show --imei
IMEI: 354219010024303
Wireless LAN mode set and read
Description: Allows user to configure the Wireless LAN interfaces on the 3G router.
This command can be use to configure basic feature, security feature, wireless bridge feature and MAC filter
features of the wireless LAN interface.
Synopsis:
> wlan
wlan command usage :
wlan config [option]
wlan security [option]
wlan macfilter [option]
wlan wds [option]
wlan info [option]
wlan –help
Each option will be explained separately below.
Note: The settings changed from these commands take effect immediately and will be updated on the web page
1. Please enable the wireless BEFORE changing other wireless settings.
2. The wlan command will save the configuration into flash memory and the new settings will be saved.
Since the settings changed from wlan command take effect immediately, it is not recommended to modify the wireless settings
through the Web UI at the same time.