NetComm Gateway Series Network Router User Manual


 
6 SmartVoice Gateway(s) User Guide
YML832 Rev2
NetComm SmartVoice Gateway Features
WAN
One 10/100Mbps auto-negotiation, auto-crossover RJ-45 Ethernet port
Support static IP, PPPoE, Bigpond Cable and DHCP address assignment and dynamic DNS (DDNS)
QoS: IP TOS (Type of Services) and DiffServ (Differentiated Services) for both SIP signaling and RTP
NAT Traversal : Port Forwarding, STUN, UPnP and Outbound Proxy
NTP: (Network Time Protocol RFC 1305), Accepts up to 3 Time Server
Time Zone Support
MAC Address Clone
RTP Packet Summary : packet sent, packet received, packet loss for voice quality analysis
LAN
Four 10/100Mbps auto-negotiation, auto-crossover RJ 45 Ethernet ports
Supports router and bridge mode (NAT mode and Non-NAT mode)
DHCP server
Advance Firewall and DoS Protection
NAT (Network Address Translation) and PAT (Port Address Translation)
DMZ, Virtual Server
Traffic Filtering based on MAC address, IP address, TCP/UDP Port number and URL string pattern
Prevents attacks based on TCP, UDP, IP and ICMP protocols
Prevents attacks such as SYN Flood, IP Spoofing, Ping of Death, Tear Drop, etc.
Voice Features
SIP (RFC3261) compatible
Voice codecs : G.711 a /ulaw, G.726, G.729A, G.723.1
CNG (Comfort Noise Generation)
VAD (Voice Activity Detection)
Silence suppression/detection
G.165/G.168 echo cancellation
Adjustable Jitter Buffer and programmable Gain Control
In-Band DTMF, Out-Of-Band DTMF relay (RFC2833, SIP INFO)
Multiple SIP Proxy server entries with failover mechanism
Polarity reversal detection (FXO/PSTN) and generation (FXS)
T.30 (G.III) / Real time T.38 / Secured T.38 FAX relay
DTMF, FSK (Bellcore & ETSI) Caller ID detection and generation.
Support Caller ID Restriction (CLIR)
FXO hang up detection : Busy Tone cadence auto learning/detection*
Support VoIP-to-PSTN (transit out) / PSTN-to-VoIP (transit in) applications*
Digit Map for dial plan