SmartVoice Gateway(s) User Guide 75
YML832 Rev2
4. Configuring the Gateway via IVR
Preparation
•Install the Gateway according to the instructions as described in Chapter 2.
•If a static IP is used, confirm the desired IP settings of the WAN Port (IP address, Subnet Mask, and
Default gateway). Please contact your local Internet Service Provider (ISP) if you have any questions.
•If using dialup ADSL (PPPoE) for network connection, confirm your broadband account name and
password.
•If users wish to build a Gateway under the NAT, Gateway WAN Port IP address and LAN Port should
not use the same range. This is to avoid phone failures.
Configuration Methods
The gateway provides two configuration options:
1) Web Interface
2) Telephone IVR (Interactive Voice Response)
The IVR provides basic query and configuration, while the Web interface provides a full configuration.