NetComm NB1300 Modem User Manual


 
www.netcomm.com.au Rev. 2 - YML643
Page 6 NB1300 ADSL Modem
Ethernet Gateway Configuration
Before continuing, ensure you have the following items and information ready:
A Windows 98, ME, NT, 2000 or XP client machine with a Network Interface Card
installed.
Either a Network Hub and two UTP cables OR one Crossover UTP cable.
A telephone line with ADSL service enabled.
User Name, Password, VPI, VCI, encapsulation and DNS server settings for your ADSL
account (ask your ISP if unsure) .
Note: The following procedure presumes your NB1300 is set to a factory default IP
address 192.168.1.1.
Step 1: Connecting your computer to the NB1300
Using either a hub and two UTP cables, or just one crossover UTP cable, connect the
NB1300 Modem Router to your computer.
Connect one end of the ADSL phone line to the NB1300 ADSL Modem and the other end
to the wall socket.
Connect the power pack to the NB1300 ADSL Modem and switch on the power switch.
Ensure that there is a LAN link light on the NB1300.
Ensure that the computer you intend to use has an IP address in the same subnet as the
NB1300 ADSL Modem. (e.g. the NB1300’s default IP is 192.168.1.1 - your computer
should be on 192.168.1.100 or similar.) If you have DHCP enabled on your computer, the
NB1300 will assign your computer a suitable IP address.
Ensure that your computer has a LAN link light.