Filter
Top Products
RangeMax Wireless-N 150 Router Setup Manual
Help with Troubleshooting 22
v1.0, November 2009
Obtaining an Internet IP Address
If your wireless router is unable to access the Internet, and your Internet light is amber or blinking
amber, check the wireless router to see if it is able to get an Internet IP address from your service
provider. Unless you have a static IP address, your wireless router automatically requests an IP
address from your service provider.
To check the Internet IP address from the browser interface:
1. Log in to the wireless router.
2. Use the Router Status link under the Maintenance heading to check that an IP address is shown
for the Internet port. If 0.0.0.0 is shown, your wireless router has not obtained an IP address
from your service provider.
If your router is unable to obtain an IP address from the your service provider, the problem might
be one of the following:
• Your service provider might require a login. Ask your service provider whether they require
PPP over Ethernet (PPPoE) login.
• The service name, user name, and password might be set incorrectly. See “Troubleshooting
PPPoE”.
• Your service provider might check for your computer’s host name.
Assign the computer host name of your ISP account to the wireless router in the Basic Settings
screen.
• Your service provider allows only one Ethernet MAC address to connect to Internet, and
might check for your computer’s MAC address, in this case, do one of the following:
• Inform your service provider that you have bought a new network device, and ask them to
use the wireless router’s MAC address.
• Configure your router to spoof your computer’s MAC address. This can be done in the
Basic Settings screen. Refer to the online help in the wireless router main menu.
Troubleshooting PPPoE
To troubleshoot a PPPoE connection:
1. Log in to the wireless router.
2. Under the Maintenance heading, select the Router Status link.
3. Click the Connection Status button.
4. If all of the steps indicate OK then your PPPoE connection is up and working.