NETGEAR DG834G Network Router User Manual


 
Reference Manual for the ADSL Modem Wireless Router DG834G
8-46 Virtual Private Networking
v1.2, October 2006
5. Click Apply. The Get VPN Policies web page is displayed.
6. Repeat for the DG834G v3 on LAN B and pay special attention to use the following network
settings as appropriate.
General, Remote Address Data (e.g., 14.15.16.17)
Remote LAN, Start IP Address
IP Address (e.g, 192.168.0.1)
Subnet Mask (e.g., 255.255.255.0)
Preshared Key (e.g., 12345678)
7. Use the VPN Status screen to activate the VPN tunnel by performing the following steps:
Figure 8-44
Note: The VPN Status screen is only one of three ways to active a VPN tunnel. See
“Activating a VPN Tunnel” on page 8-29 for information on the other ways.