Filter
Top Products
Advanced Settings
120
N150 Wireless ADSL2+ Modem Router DGN1000v3
If you do not specify an ID here, the modem router generates one automatically from its
MAC address.
5. Specify the IPv6 filtering mode by selecting one of the following radio buttons:
• Secured. In the secured mode, which is the default mode, the modem router inspects
both TCP and UDP packets.
• Open. In the open mode, the modem router inspects UDP packets only.
6. Click the Apply button.
Y
our settings are saved.
IPv6 Auto Config
To set up an IPv6 Internet connection through auto configuration:
1. Select ADVANCED > Advanced Setup > IPv6
.
2. From the Internet Connection Type menu, select Auto Config
.
The screen adjusts:
The modem router automatically detects the information in the following fields:
• Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired
for the modem router’
s WAN (or Internet) interface. The number after the slash (/) is
the length of the prefix, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the field displays Not Available.