Filter
Top Products
NETGEAR genie Basic Settings
35
N150 Wireless ADSL2+ Modem Router DGN1000v3
3. Select the WPA mode:
• WPA [TKIP]
• WPA2 [AES]
• WPA [TKIP] + WPA2 [AES]
4. Type the IP address of the RADIUS server.
The address can be on your LAN or it can be an external address.
5. Enter the port number for the RADIUS server in the range from 1 to 6553.
The default number is 1812.
6. T
ype the shared secret, which needs to be between 1 and 128 characters.
The default value is blank.
The shared secret is case-sensitive.
7. Click the Apply
button.
Security Options: WEP
Wired Equivalent Privacy (WEP) security is a legacy authentication and data encryption
mode that has been superseded by WPA-PSK and WPA2-PSK. WEP supports speeds of up
to 54 Mbps (the modem router is capable of speeds of up 150 Mbps) and does not function
with WPS. However, if you set up a wireless distribution system (WDS; see Wireless
Distribution System on page 97), WEP is the only security that can be supported.
Note: The WEP option displays only if you select Up to 54 Mbps from the
Mode menu.
To configure WEP security:
1. Select BASIC > Wireless
.
The Wireless Settings screen displays.
2. In the Security Options section, select the WEP radio button.