NETGEAR FS 524S Switch User Manual


 
2-3physical description
Figure 2-2. Front and Back Panels of the FS524S Switch
10/100 Mbps RJ-45 Ports
As Figures 2-1 and 2-2 show, the FS517TS Switch has 16 RJ-45 ports, while the
FS524S Switch has 24 RJ-45 ports.These ports are auto-sensing 10/100 Mbps ports:
When you insert a cable into an RJ-45 port, the switch automatically ascertains the
maximum speed (10 or 100 Mbps) and duplex mode (half- or full-duplex) of the
attached device, and displays this information using the front panel 100 Mbps and FDX
LEDs for that port (LEDs are described in the next section).The 10/100 Mbps ports
support only unshielded twisted-pair (UTP) cable terminated with an 8-pin RJ-45 plug.
100 Mbps
LEDs
10/100 Mbps
ports
Power
LED
Stacking
ports
Stack LEDs
Normal/Uplink
push button
Activity/Collision LEDs
Fans
Front Panel of the Model FS524
s
Switch
Rear Panel of the Model FS524
s
Switch